Picture a windowsill in early December: three small trees in sage, cream and coral, a lantern glowing through star-shaped cut-outs, and a gnome who looks like he was knitted by a patient grandmother. None of it came from a shop. Each piece is a 3D printed Christmas tree or a friend of one, printed from a file you download and print at home. Below are 25 designs, grouped by job: tabletop trees, candle holders and lanterns, little character scenes, and toppers for the real tree in the corner.
Modern 3D Printed Christmas Trees for the Tabletop
These are trees as objects: shapes, textures and a restrained palette. They sit well on a shelf, a mantel or a desk that does not want tinsel.
Wavy Modern Trio
Three twisted, wavy trees that look more like gallery sculpture than holiday decor. The photo shows them in coral pink with a red star, sage green with a finial, and a plain cream spiral. They suit a modern mantel or a sideboard where a traditional tree would feel out of place. A silk filament will make the twists catch the light as you walk past.
Paper-Fold Pedestal Trees
Three cream trees built from stacked ribbed tiers on little pedestal bases, so they read like folded paper. It is a calm, Scandinavian look that sits happily next to linen, wood and dried branches. Group them close together on a tray rather than spreading them out. A matte white or oat filament keeps the paper illusion going; anything glossy gives the game away.
See the Paper-Fold Pedestal Trees
Scalloped Sage Pair
Two sage-green trees with scalloped, layered branches and a pink star on each, one tall and one small. The pair feels like a parent and child, which makes it a sweet pick for an entryway console or a kid’s bedroom shelf. If your printer works with one colour at a time, a filament change near the top is an easy way to get the star in a contrast shade.
Fringe-Branch Trio
Three trees with soft, layered fringe branches, brown trunks and terracotta or beige stars, shown in sage green, beige and white. The fringe gives them a handmade, almost felted look. Line them up along a window or set them between place settings on the dining table. To copy the two-tone look in the photo, print in the main colour and paint the trunks brown with a small brush.
Ribbon and Pearl Cones
Four cone trees, two green and two white, dressed the classic way: red ribbon spirals or gold bead garlands, red bows, gold stars and red and gold baubles. This is the set for anyone who finds minimalism a bit chilly, and it belongs on a gift table. The details are small, so plan an evening with acrylic paint and a fine brush for that finished look.
See the Ribbon and Pearl Cones
Rounded Ribbed Pink Tree
One pink tree made of three rounded, ribbed tiers stacked like a pile of pumpkins, with a cream star on top. It is cheerful and a little silly in the best way. A single tree like this works as a desk ornament or a small gift for someone who already owns too many mugs. A slightly lower layer height helps keep those rounded ribs smooth.
See the Rounded Ribbed Pink Tree
Fan-Tier Tree Family
Three cream trees of pleated, fan-like tiers, each finished with a gold star, in tall, medium and small sizes. Next to the paper-fold set above they look more formal, closer to a wedding cake than a craft table. Line them up on a mantel in size order. For the gold stars, mask the cream tiers with tape and give only the stars a light coat of gold spray.
Knitted Bobble Trees
Two trees covered in a knitted bobble texture, like a chunky winter jumper. One is cream with a gold ball on top, the other pink with a pink star. They bring warmth to a bookshelf or a reading corner and look right next to wool throws and real knitwear. Pick a light colour: it shows the bobble texture best, while dark filament tends to flatten small surface detail.
Spiral, Lattice and Wave Sculptures
Three cream trees that each take a different route: a wavy ribbed cone, an open spiral ribbon, and a lattice cone with diamond-shaped openings, all on round feet. Put them on a coffee table where people can see the shapes from all sides. Open forms like the spiral and the lattice reward a slower print speed, which keeps thin edges crisp.
See the Spiral, Lattice and Wave Sculptures
Ribbed Cone Trio
Three plain ribbed cones in sage green, cream and red, in different sizes and with no stars at all. They are the most minimal trees on this list, which is exactly the point. They suit a kitchen shelf or an office where full decorations would be too much. With no star to finish them, colour does all the work, so choose three shades that clearly belong together.
Christmas Tree Candle Holders and Lanterns
These designs are built around light. Use LED tealights in every one of them: printed plastic and a real flame do not mix.
Important
Every model in this list is printed in plastic (PLA or PETG). Never put a real candle inside or near them: use only LED tealights or LED string lights.
Leafy Tealight Trees
Three tree-shaped tealight holders in green, cream and red, with leafy layered branches, a star on top and a round opening at the base for a tealight. With the tealight hidden in the base, they still look like ordinary tabletop trees. Group them on a dining table or a hallway shelf. Measure your LED tealight before printing and make sure it slides into the base opening easily.
Star-Cut Lantern Village
Three peach-cream tree lanterns perforated with stars and dots, each with an arched, star-cut doorway, standing on round white bases. Lit with an LED tealight inside, they look like a tiny village at dusk. A windowsill is the natural spot, where the glow shows from the street too. Light colours let the glow through, so stay close to the pale peach shown and print the bases in white for contrast.
See the Star-Cut Lantern Village
Cut-Out Silhouette Holders
Three white tealight holders where the whole tree outline is cut out of a curved shell, so the light fills the shape itself; one also has small star holes. In a dark room you see a glowing tree rather than a lit object. Place them near a wall so the light spills behind them. Clean any stringing off the cut-out edges with a craft knife, because every stray hair shows against the light.
See the Cut-Out Silhouette Holders
Snowflake Lanterns
Three tree lanterns in white, pink and sage green, perforated with snowflake and dot patterns, with light glowing through. They feel softer and more Nordic than the star-cut village. Run all three colours down the middle of a long table. Darker filament dims the glow, so treat the sage green as the moody one and the white as the bright one.
Merry Christmas Lantern
A lampshade-style cylinder with “Merry Christmas” written around it and cut-outs of trees and snowflakes, glowing warm from inside. Unlike the cone lanterns, it reads as a message as well as a light. Put it by the front door, where guests see the message first. Lettering cut-outs leave thin bridges between holes, so print the outer walls slowly and use a fresh, dry spool to avoid blobs.
See the Merry Christmas Lantern
Oval-Hole Cone Lantern
A tall white cone lantern scattered with random oval openings, with a star on top. The holes are irregular, so the light lands on the wall in a loose, organic pattern rather than a neat grid. One of these on a side table in a dark corner does a lot of work. Switch off the overhead lights and move it around: distance from the wall changes the pattern completely.
See the Oval-Hole Cone Lantern
Glowing Tiered Tree
A cream layered tree with a gold star on top, lit from inside through rows of round holes on each tier. Switched off, it is a plain tabletop tree; switched on, the holes light up in rings. A bedside table is a good home for it. A warm-white LED tealight suits the cream colour far better than a cold, blue-white one.
Trees With Characters
Sometimes a tree needs company. These sets pair a tree with reindeer, snowmen, gnomes or Santa himself, and one tree even holds the sweets.
Ribbed Santa and Friends
A cream figurine set with a ribbed texture: Santa, a snowman, a reindeer and a tree with a star. In one colour the group looks unified, a little like carved wood or porcelain. Keep the rest of the shelf neutral around it. An ivory or bone-coloured filament leans into the carved look without any painting.
See the Ribbed Santa and Friends
Chubby Reindeer and Tree
A chubby, smiling beige reindeer sits next to a sage-green tree with white baubles and a yellow star, all on one round base. It is cute without trying too hard, and children will probably claim it for their room. It also makes an easy gift for a teacher or a neighbour. Paint pens are the quickest way to add the white baubles and the yellow star after printing.
See the Chubby Reindeer and Tree
Painted Reindeer, Tree and Gnome
A painted figurine trio: a brown reindeer with a red nose and scarf, a green tree with red baubles and a gold garland, and a gnome in a long red knitted hat. The photo shows a full storybook finish, so this one is for people who enjoy painting as much as printing. Prime the prints first: paint goes on more evenly and the small details stay sharp.
See the Painted Reindeer, Tree and Gnome
Knitted Gnome, Tree and Snowman
A chunky trio with a knitted-yarn look: a gnome in a brown hat with a white beard, a green tree with red pom-poms and a white star, and a snowman in a top hat and red scarf. The texture makes them look soft enough to squeeze. They are lovely on a kitchen windowsill. A busy surface texture like this hides layer lines well, so small print flaws matter less here.
See the Knitted Gnome, Tree and Snowman
Tree Candy Bowl
A green tree with red bows, a garland and a gold star rising from a red-and-gold bowl decorated with snowflakes. It is a candy dish, so it earns its place on the coffee table instead of just looking nice. Printed plastic is not automatically food-safe, so keep the sweets wrapped, or use a food-safe filament and sealant.
3D Printed Christmas Tree Toppers
A 3D printed Christmas tree topper is the last thing to go on and the first thing people look at. Here are three to choose from.
Puffy Gold Star
A smooth, puffy five-point star in gold, with a hollow stem that slides onto the top branch. It is the classic topper done cleanly, without glitter or fuss. A silk gold filament gets you close to the look in the photo with no paint at all, which is nice when you would rather be decorating than sanding.
Starry Angel
An angel in a long, flowing gown with large wings, decorated with a moon and stars. It is listed as a tree topper, but the photo shows it standing on a table, so it can move to the mantel once the tree comes down. Wings this big add weight, so print with a low infill and check that your top branch can hold it.
Open Outline Star
A large, hollow outline star with a stem, shown in tan filament on top of a real Christmas tree. Because it is open in the middle, the branches show through, so it never looks heavy even at this size. It suits natural, rustic decor with wooden ornaments and paper garlands. A wood-fill or kraft-brown filament matches the warm tan in the photo.
Tips Before You 3D Print a Christmas Tree
Start early. A full set of trees, lanterns and figurines takes longer than it looks, and December is the month your printer will choose to clog. If any of it is meant as gifts, give yourself a few weeks.
Choose filament for the look: matte hides layer lines and suits the Scandinavian and knitted designs, while silk adds shine to stars and sculptural shapes. Lanterns and holders take LED tealights only, never a real flame. Check every topper on your tree’s top branch before decorating day.
